EDM Wire: Hard Brass EDM Wire:
  • HardBrass EDM Wire Material Type: Hard Brass
  • HardBrass EDM Wire Diameter: 0.15m/m
  • HardBrass EDM Wire Tensile Strength: 94~110Kgf/mm2
  • HardBrass EDM Wire Elongation: 1%
  • HardBrass EDM Wire Composition: 60 Cu/Zn
  • HardBrass EDM Wire Bobbin Type: P-3R
  • HardBrass EDM Wire Weight of Wire on Bobbin: 3kgs
  • HardBrass EDM Wire Diameter Of Wire: 0.15mm
  • HardBrass EDM Wire Flange Diameter: 130mm
  • HardBrass EDM Wire Shell Diameter: 80mm
  • HardBrass EDM Wire Traverse Width: 110mm
  • HardBrass EDM Wire Axial Hole: 20mm
  • Soft Brass EDM Wire:
  • SoftBrass EDM Wire Material Type: Soft Brass
  • SoftBrass EDM Wire Diameter: 0.23m/m
  • SoftBrass EDM Wire Tensile Strength: 95~117Kgf/mm2
  • SoftBrass EDM Wire Elongation: 2%
  • SoftBrass EDM Wire Composition: 80 Cu/Zn
  • SoftBrass EDM Wire Bobbin Type: P-6R
  • SoftBrass EDM Wire Weight of Wire on Bobbin: 8kgs
  • SoftBrass EDM Wire Diameter Of Wire: 0.455mm
  • SoftBrass EDM Wire Flange Diameter: 160mm
  • SoftBrass EDM Wire Shell Diameter: 2mm
  • SoftBrass EDM Wire Traverse Width: 160mm
  • SoftBrass EDM Wire Axial Hole: 50mm
  • Zinc Plated Wire Cut EDM:
  • ZincPlated Wire Cut EDM Material Type: Zinc Plated
  • ZincPlated Wire Cut EDM Diameter: 0.15m/m
  • ZincPlated Wire Cut EDM Tensile Strength: 94~110Kgf/mm2
  • ZincPlated Wire Cut EDM Elongation: 1%
  • ZincPlated Wire Cut EDM Composition: 60 Cu/Zn
  • ZincPlated Wire Cut EDM Bobbin Type: P-3R
  • ZincPlated Wire Cut EDM Weight of Wire on Bobbin: 3kgs
  • ZincPlated Wire Cut EDM Diameter Of Wire: 0.15mm
  • ZincPlated Wire Cut EDM Flange Diameter: 130mm
  • ZincPlated Wire Cut EDM Shell Diameter: 80mm
  • ZincPlated Wire Cut EDM Traverse Width: 110mm
  • ZincPlated Wire Cut EDM Axial Hole: 20mm
  • P-3R Wire Cut EDM:
  • P-3R Wire Cut EDM Material Type: P-3R
  • P-3R Wire Cut EDM Diameter: 0.23m/m
  • P-3R Wire Cut EDM Tensile Strength: 95~117Kgf/mm2
  • P-3R Wire Cut EDM Elongation: 2%
  • P-3R Wire Cut EDM Composition: 80 Cu/Zn
  • P-3R Wire Cut EDM Bobbin Type: P-6R
  • P-3R Wire Cut EDM Weight of Wire on Bobbin: 8kgs
  • P-3R Wire Cut EDM Diameter Of Wire: 0.455mm
  • P-3R Wire Cut EDM Flange Diameter: 160mm
  • P-3R Wire Cut EDM Shell Diameter: 2mm
  • P-3R Wire Cut EDM Traverse Width: 160mm
  • P-3R Wire Cut EDM Axial Hole: 50mm
  • P-5R Wire Cut EDM:
  • P-5R Wire Cut EDM Material Type: P-5R
  • P-5R Wire Cut EDM Diameter: 0.33m/m
  • P-5R Wire Cut EDM Tensile Strength: 9`~147Kgf/mm2
  • P-5R Wire Cut EDM Elongation: 3%
  • P-5R Wire Cut EDM Composition: 40 Cu/Zn
  • P-5R Wire Cut EDM Bobbin Type: P-6R
  • P-5R Wire Cut EDM Weight of Wire on Bobbin: 5kgs
  • P-5R Wire Cut EDM Diameter Of Wire: 0.34mm
  • P-5R Wire Cut EDM Flange Diameter: 120mm
  • P-5R Wire Cut EDM Shell Diameter: 5mm
  • P-5R Wire Cut EDM Traverse Width: 110mm
  • P-5R Wire Cut EDM Axial Hole: 40mm
  • P-11 Wire Cut EDM:
  • P-11 Wire Cut EDM Material Type: P-11
  • P-11 Wire Cut EDM Diameter: 0.13m/m
  • P-11 Wire Cut EDM Tensile Strength: 95~157Kgf/mm2
  • P-11 Wire Cut EDM Elongation: 4%
  • P-11 Wire Cut EDM Composition: 50 Cu/Zn
  • P-11 Wire Cut EDM Bobbin Type: P-3R
  • P-11 Wire Cut EDM Weight of Wire on Bobbin: 2kgs
  • P-11 Wire Cut EDM Diameter Of Wire: 0.34mm
  • P-11 Wire Cut EDM Flange Diameter: 146mm
  • P-11 Wire Cut EDM Shell Diameter: 6mm
  • P-11 Wire Cut EDM Traverse Width: 130mm
  • P-11 Wire Cut EDM Axial Hole: 80mm
  • Wire EDM P-6R Wire EDM:
  • P-6R Wire EDM Material Type: P-3R
  • P-6R Wire EDM Diameter: 0.23m/m
  • P-6R Wire EDM Tensile Strength: 95~117Kgf/mm2
  • P-6R Wire EDM Elongation: 2%
  • P-6R Wire EDM Composition: 80 Cu/Zn
  • P-6R Wire EDM Bobbin Type: P-6R
  • P-6R Wire EDM Weight of Wire on Bobbin: 8kgs
  • P-6R Wire EDM Diameter Of Wire: 0.455mm
  • P-6R Wire EDM Flange Diameter: 160mm
  • P-6R Wire EDM Shell Diameter: 2mm
  • P-6R Wire EDM Traverse Width: 160mm
  • P-6R Wire EDM Axial Hole: 50mm
  • P-7R Wire EDM:
  • P-7R Wire EDM Material Type: P-5R
  • P-7R Wire EDM Diameter: 0.33m/m
  • P-7R Wire EDM Tensile Strength: 9`~147Kgf/mm2
  • P-7R Wire EDM Elongation: 3%
  • P-7R Wire EDM Composition: 40 Cu/Zn
  • P-7R Wire EDM Bobbin Type: P-6R
  • P-7R Wire EDM Weight of Wire on Bobbin: 5kgs
  • P-7R Wire EDM Diameter Of Wire: 0.34mm
  • P-7R Wire EDM Flange Diameter: 120mm
  • P-7R Wire EDM Shell Diameter: 5mm
  • P-7R Wire EDM Traverse Width: 110mm
  • P-7R Wire EDM Axial Hole: 40mm
  • P-8R Wire EDM:
  • P-8R Wire EDM Material Type: P-11
  • P-8R Wire EDM Diameter: 0.13m/m
  • P-8R Wire EDM Tensile Strength: 95~157Kgf/mm2
  • P-8R Wire EDM Elongation: 4%
  • P-8R Wire EDM Composition: 50 Cu/Zn
  • P-8R Wire EDM Bobbin Type: P-3R
  • P-8R Wire EDM Weight of Wire on Bobbin: 2kgs
  • P-8R Wire EDM Diameter Of Wire: 0.34mm
  • P-8R Wire EDM Flange Diameter: 146mm
  • P-8R Wire EDM Shell Diameter: 6mm
  • P-8R Wire EDM Traverse Width: 130mm
  • P-8R Wire EDM Axial Hole: 80mm
  •  

    50 Ohm Antenna Coaxial cable

    RG Type

     

      Key Feature :
    • Insulated by pure HDPE, or gas injected foamed dielectric.
    • Provide supper low attenuation loss in wider frequency range.
    • Maintain low loss and stable VSWR to 6 GHz.
    • Suitable for Wireless Transmission , Amateur Radio and Base Radio Antenna Transmission use.

     

    Construction :

     
    RG Type   RF type   JIS Type